¿Estos repuestos son compatibles con tu vehículo? Averígualo ahora.

Windshield Wiper Systems for Toyota Sienna

Having a windshield wiper system clean and in good repair on your Toyota Sienna goes a long way when it comes to having proper visibility necessary for operating the automobile safely. Problems as simple as worn wiper blades can jeopardize the safety of the passengers and others on the roadway. Having any necessary repairs and maintenance needs corrected in a timely manner minimizes any such problems from occurring.

How are Toyota wiper blades replaced?
  1. Pull the wiper arm up and away from the vehicle.
  2. Press the small tab located on the underside of the wiper where it joins the wiper arm.
  3. With the tab pressed, slide your wiper blade off of the arm in a downward motion.
  4. Slide the replacement wiper blade onto the wiper blade arm and pull it tight into position.
  5. Lower the wiper arm back onto the glass surface so it lays flush.
When should the wiper blades be replaced?

It is recommended that you change the windshield wiper blades on a Toyota Sienna once every six months to a year. However, if you notice that there is a change in your ability to see clearly while driving, the wiper blades should be changed immediately. The following are common signs that let you know you should install replacement blades as soon as possible.

  • The wipers make a squeaking or chattering noise when turned on.
  • The wiper blades are not making proper contact with the surface of the windshield.
  • The blades skip while operating.
  • Smears or streaks appear, reducing driving visibility, when the wiper blades are in operation.
What prevents rear washer fluid from dispensing on the Sienna?

There are several reasons why the rear washer port fails to operate properly.

  • Low cleaning solution: Check the fluid level within the reservoir. If the fluid is low, do not operate the pump as this can cause damage to the various parts of the wiper system.
  • Clogged washer port: Check the washer port running from the reservoir to the back of the automobile for any clogging.
  • Plugged jet: Insert a needle into the jet to see if there is a clog preventing the jet from spraying.
  • Faulty pump: Press the spray switch to see if you hear the pump running that transfers the cleaning solution to the back jet. If the pump cannot be heard, you may need to replace this component.
Where are the washing solution jets on a Toyota Sienna?

The front washer jets are located in the center of the hood directly below the windshield on contemporary model Toyota Sienna automobiles. If you have a vehicle that has been customized or is an older model, the windshield washer jets will be located under the hood in an area where they can be aimed directly at the windshield to clean.

Can a crack in an auto washer reservoir be repaired?

Yes, there are repair and replacement products available to help make small repairs to a windshield washer reservoir. However, due to the importance of having good visibility while driving, performing replacement services on a washer reservoir will ensure that the problems experienced have been corrected properly and will not hinder the safety of you or others on the road.