Luces traseras Para Isuzu NPR

Taillights for Isuzu NPR

Be courteous to other drivers and protect your precious cargo by ensuring that the taillights on your Isuzu NPR truck are in working order. Taillights are an invaluable safety tool on the road, and replacing these vital parts is easy. Simply seek out the right taillights for your Isuzu so that you have what you need.

What types of taillights are available for the NPR?

The two types of lighting technologies used in taillights for the Isuzu NPR are incandescent bulbs and light-emitting diodes (LEDs). Incandescent bulbs consist of a metallic filament enclosed in a glass housing and last about 2,000 hours. When electrified, the filament lights up with a powerful glow. LEDs, on the other hand, do not make use of glass or filaments and instead are composed of various semiconductor materials such as gallium arsenide and gallium phosphide. LEDs are incredibly bright but don’t get hot even after being on for hours. They use up a relatively small amount of electricity and are rated to last about 50,000 hours.

How do you replace Isuzu taillight lenses?

If one of the lenses on your Isuzu NPR taillights is cracked, leaking, or otherwise damaged, it’s time to replace the part with an OEM-style plastic lens. Replacing this critical component on the NPR is simple, requires a Phillips screwdriver, and should take about five minutes.

  • Turn off the engine, and locate the damaged lens.
  • Locate the four screws at each corner of the lens. Remove the screws with a screwdriver.
  • Discard the old lens, and position its replacement into place.
  • Insert each of the four screws, and tighten them to complete installation.
How do you install replacement taillight assemblies?

Whether you’re replacing a damaged unit or upgrading to LED lighting, it can sometimes be necessary to replace one or both of the taillight assemblies equipped on your Isuzu NPR. While it is certainly possible to only replace one assembly, it is suggested that both be replaced at the same time because factory-equipped taillights for the Isuzu NPR lose luminosity over time, leading to a lopsided and potentially distracting look. Installing new taillight assemblies on this Isuzu vehicle requires a Phillips screwdriver and about an hour of labor to replace both sides.

  • Turn off the engine, and disconnect the battery.
  • Locate and remove the three screws at the top of the taillight assembly. The taillight assembly should now come free from the vehicle.
  • Disconnect the electrical wiring from the back of the assembly. Discard the old assembly.
  • Position the new assembly into place and connect the electrical wiring.
  • Holding the new assembly in place, insert the three screws to secure it to the vehicle. Repeat these steps for the opposite side.

Categorías