Reflector telescopios

Comprar por categoría

Buscar por Apertura

Buscar por Marca

1,020 resultados

Reflector Telescopes

Reflector telescopes come in many designs based on the source image to be observed. The ability to reflect light has paved the way for new discoveries with the opportunity to observe magnified terrestrial or deep space images. From a steady mount to remove vibration to each reflector inside, you can build or buy a telescope that exactly matches your needs.

What is a reflector telescope?

Reflector telescopes have either one or multiple curved mirrors, also known as parabolic mirrors, to reflect light and form a magnified image of the source object. The reflecting technique makes these images possible from vast distances in deep space. The main reflector is known as a primary mirror, with various designs using additional reflecting surfaces or a digital image sensor to record images. Most modern primary mirrors are made from a solid glass cylinder with a vacuum deposited thin layer of aluminum on the surface to create a highly effective reflecting surface.

  • Understanding Reflecting Optics: The curved mirror design supports maximum optical viewing of distant images by preventing most spherical aberrations and all chromatic aberrations. Also known as chromatic distortion, chromatic aberration in optics means the lens is unable to focus the colors to the same convergence point. Spherical aberration means there is increased light reflection at the edges of the reflector surface, causing a distorted and unfocused image. The mirror in the Hubble Space Telescope was slightly off at the edges by just a couple hundredths of a millimeter. This was enough to cause extreme distortion until a correction was implemented by a later space flight crew, resulting in stunning and unparalleled images for decades from deep space. Technological advancements in mirror and glass grounding and coatings, in addition to digital image processing, are paving the way to further eliminating optical distortions, such as gravitational deformation.
What are the types of reflector telescopes?
  • Newtonian: Isaac Newton’s reflector design was completed in 1668. It makes use of a parabolic primary mirror reflecting the light into a flat secondary mirror in order to focus an image.
  • Gregorian: James Gregory published this reflecting telescope design in 1663 in order to better observe terrestrial objects by using a concave secondary mirror.
  • Cassegrain: Laurent Cassegrain is attributed for this design in 1672 making use of a hyperbolic secondary mirror to achieve distant viewing with a short tube. Many variations of this reflecting design exist with additional hyperbolic or third mirror options.
  • Off-Axis: Several reflecting telescope designs exist to prevent the obstruction of incoming light by moving or removing the secondary optics.
What do all the telescope sizes mean?
  • Aperture is the size of the opening the light travels through and affects the appearance at the image plane by allowing certain rays to reach it.
  • Focal length is the distance from the telescope lens to the image sensor, like an eyepiece or film.
  • The lens diameter is simply the width measurement of the front-most lens in the telescope.
  • Magnification of an image can be determined by dividing the focal length of the telescope by the eyepiece size, so a 500mm focal length with a 10mm eyepiece would provide a 50x magnification.