Motorcycle Foot Pegs & Pedal Pads for Honda CB500X

Motorcycle Foot Pegs and Pedal Pads for Honda CB500X

The foot pegs and pedal pads are important for the proper functioning of your Honda CB500X during a ride. The pegs provide a place for you or a passenger to rest your feet and help you steer your bike through sharp turns while the pads help you get purchase on the brake lever for safe stopping. The replacement of these parts requires 20 to 30 minutes and can be performed by one person with just a few tools.

The foot peg mounts in place by a bolt threaded through the arm of the assembly and attached to the bike frame. Before performing the replacement of fixed or adjustable pegs, stabilize your Honda with a motorcycle stand.

1. Loosen the bolt securing the foot peg to the frame of the vehicle.
2. Remove the part and replace it with the new assembly.
3. Tighten the bolt to secure the peg to the frame.
4. Repeat these steps for the other side of the vehicle.

The front pads of the CB500X include a chrome assembly that attaches to the vehicle’s braking system and provides leverage at the foot of the rider. The rubber pads can be replaced separately from the assembly as they become worn out.

1. Loosen the bolts securing the assembly to the vehicle frame.
2. Remove the assembly from the vehicle.
3. Loosen the bolts securing the rubber pad to the assembly if you’re replacing this part independently.
4. Replace the pad and then tighten the bolts.
5. Position the assembly on the vehicle frame and then tighten the bolts.

The seat height of this vehicle is 31.8 inches, and the foot pegs are approximately 9 inches above the ground. The distance from the seat to the foot pegs is about 23 inches, so riders between 62 inches and 80 inches in height can sit comfortably in the seat. When sitting in the seat with your feet on the pegs, your legs should be bent at about 30 to 45 degrees.

Replacement parts for your year Honda CB500X are available as identical replicas as well as high-performance aftermarket upgrades. Replacing these parts with identical products helps you maintain the cosmetic condition of your motorcycle. Upgrading them with high-performance aftermarket replacements can help you maneuver through sharp turns and brake your vehicle with better responsiveness.

Worn-out pads can make it difficult to stop your bike and may increase the risk of an accident. Broken or missing foot pegs can make it harder to control your vehicle and may increase your risk of injury. Keeping these parts in good condition helps you stay safe and responsive on the road.