Luces LED para Ford F-250 Super Duty

Ford F-250 Super Duty LED Lights

LED lighting is one of the most groundbreaking technologies since the discovery of the wheel. These super-bright lights are the perfect off-road illumination upgrade for your Ford F-250 Super Duty. They also serve as efficient and long-lasting headlight bulb replacements for your XLT, Lariat, or other crew cab pickup.

Replacing the headlights in your Ford F-250 Super Duty is a simple task that you might undertake for a number of reasons. Your headlights may be burned out, or you might wish to increase your Ford truck’s light-throwing power. Whatever the case, following these simple steps that require minimal knowledge and common shop tools will have you shining a path in no time.

1. Open the hood on your Super Duty and locate the four Phillips head screws holding your headlight assembly in place. Remove all four screws.
2. Remove the headlight by pushing down on the plastic tab on top of the assembly and then carefully pull the headlight away from the grille.
3. Pull the electrical connectors off the headlight and squeeze the release tabs to separate the headlight from the assembly. Turn the bulb clockwise to remove.
4. Install the new bulb by inserting it into the assembly, turning the bulb counterclockwise, and inserting the electrical connectors.
5. Insert the headlight assembly back into the grille and secure with the four Phillips head screws.

Besides their intensely bright glare, LED light bulbs, called diodes, can last for years of continuous 24-hours-a-day usage on a vehicle. LED diodes are rated for 50,000 working hours, which means that you could feasibly leave the lights on for five and a half years before they start to burn out. LED lights also take up a minuscule amount of energy. Also, LED lights run cool so you won’t burn your fingers when handling them on your F-250 Super Duty.

LED lights for your diesel powered Ford F-250 Super Duty aren’t just for exterior illumination during your drive. You can also replace your interior dome light with long-lasting LED upgrades. Following these simple steps will ensure that your installation process is quick and easy.

1. Turn off your lights and remove the retainer cover from the dome light with a flathead screwdriver.
2. Remove the old bulbs from the housing. Exercise caution as old bulbs are more prone to breakage.
3. Install the new LED dome light replacements by gently threading them into the bulb sockets.
4. Reinsert the retainer cover into the ceiling of your Ford F-250 Super Duty to complete installation.

While the headlights and fog lights on your Ford F-250 cast quite a glare on their own, off-road enthusiasts often add an LED light bar to the grille or roof of their truck to provide even more illumination. There are more hazards when off-roading than when taking a drive on a maintained road, so it pays to have a clearer image of what’s in front of your truck before cresting dunes or rocketing through a gully. Plus, there’s an unmistakable aesthetic allure to installing a brand new LED light bar on the roof of your F-250 vehicle.